Xiaomi Mijia Tool Box MJGJX001QW Electric DIY Kit

The Xiaomi Mijia Tool Box MJGJX001QW brings powered fastening, measuring, cutting, gripping and light impact tools into one organised case. Rather than filling the box with specialist equipment that may rarely be used, Xiaomi focuses on the tools commonly required for furniture assembly, household adjustments and basic DIY work.

The set is particularly useful for new homeowners, apartment residents, students and beginners who need a dependable home toolkit without building a large workshop collection.

Technical Specifications

Stage One: Measure and Plan the Job

Before installing furniture or household accessories, the included 3m self-locking tape measure helps confirm dimensions, spacing and mounting positions. The tape remains extended after being pulled and retracts when the release button is pressed.

An integrated bubble level provides basic horizontal guidance when positioning small household items. It is useful for general DIY work but should not replace a professional spirit or laser level when precise alignment is essential.

Stage Two: Open, Prepare and Organise

The retractable utility knife can open furniture packaging, cut tape and prepare suitable lightweight materials. Its 18mm blade uses an eight-segment snap-off design, allowing a worn section to be removed to reveal a fresh cutting edge.

The case also contains a dedicated storage area for commonly used screws, nails and small fittings. Keeping hardware beside the main tools reduces the need to search for individual parts during a project.

Customers comparing other compact repair products can browse the AS2 Multi Tools collection.

Stage Three: Install Screws Efficiently

The electric screwdriver is designed to reduce effort during repeated fastening and removal. Three torque levels allow the output to be matched more closely to the screw size and working material.

The separate forward and reverse controls simplify installation and removal. The LED work light switches on during operation and improves visibility inside cabinets, behind furniture and in other poorly lit areas.

Stage Four: Reach Difficult Fasteners

The 60mm magnetic extension rod increases reach when the screw sits inside a recessed hole. The flexible shaft is intended for situations where the screwdriver body cannot align directly with the fastener.

The flexible shaft is particularly useful for:

• Cabinet hinges positioned close to side panels
• Screws behind drawer mechanisms
• Fasteners near corners
• Restricted furniture interiors
• Household items with limited straight-line access

The shaft should not be bent excessively or used for high-torque final tightening. Keeping the bit aligned with the screw helps reduce slipping and wear.

Stage Five: Adjust, Grip and Finish

Not every repair involves screws. The included hand tools extend the kit to basic gripping, impact and adjustment tasks.

Three Common Projects Completed with One Case

Flat-Pack Furniture Assembly

Use the utility knife to open the packaging, the tape measure to check placement, the Allen keys for hex fittings and the electric screwdriver for repeated fastening. The rubber hammer cover can help position suitable panels without directly striking them with the metal hammer face.

Loose Cabinet or Drawer Repair

Select the correct screwdriver bit, use the extension rod or flexible shaft when access is limited and tighten the fastener gradually. The pliers can hold small components while the adjustable wrench handles compatible nuts.

Installing Small Household Accessories

The tape measure and auxiliary bubble level help plan the position, while the screwdriver, bits and hammer assist with basic installation. Appropriate wall plugs, anchors and drilling equipment must still be selected separately when working with walls.

What This Kit Does Not Replace

The Mijia Tool Box is a household repair and assembly set. It does not include a drill motor or drill bits for creating holes.

For drilling and higher-torque work, the HOTO 12V Brushless Drill Kit is a more appropriate option. For engraving, polishing and detail finishing, consider the Xiaomi Mijia Electric Rotary Tool Kit.

Xiaomi Mijia Tool Box vs HOTO 3.6V Screwdriver Kit

Choose the Xiaomi Mijia Tool Box when you need a broader collection for measuring, hammering, cutting and adjustment work. The HOTO 3.6V Screwdriver Kit QWLSD001 is more compact and provides additional screwdriver bits for users focused primarily on fastening tasks.

Charging and Long-Term Storage

The electric screwdriver charges through USB Type-C using a compatible 5V/1A charging source. A complete charge takes approximately three hours, and the screwdriver cannot operate electrically while charging.

• A USB Type-C charging cable and power adapter are not included.
• Manual screwdriver operation remains possible when the battery is empty.
• Keep the charging port clean and dry.
• Charge the battery periodically during long storage periods.
• Store metal tools in a dry area to reduce corrosion.

What Is Included in the Box?

The package includes one electric straight screwdriver, 18 short bits, four long bits, one extension rod, one flexible shaft, one adjustable wrench, one utility knife, one multi-purpose needle-nose pliers, one claw hammer, one rubber hammer cover, one eight-piece Allen key set, one 3m self-locking tape measure, one storage case and one user manual.

FAQ

1. Is the Xiaomi Mijia Tool Box suitable for beginners?

Yes. It includes commonly used household tools in an organised case and is suitable for basic repairs, furniture assembly and beginner DIY projects.

2. Does the kit include an electric screwdriver?

Yes. It includes a rechargeable straight electric screwdriver with three torque levels, forward and reverse operation and an LED work light.

3. What is the maximum screwdriver torque?

The screwdriver provides up to 4N·m in electric mode and up to 8N·m when used manually.

4. How long does the screwdriver take to charge?

A complete charge takes approximately 180 minutes using a compatible 5V/1A USB Type-C power source.

5. Is a charging cable included?

No. The official package does not include a USB Type-C charging cable or power adapter.

6. Can the kit be used for furniture assembly?

Yes. The screwdriver, bits, Allen keys, hammer, tape measure, wrench and other tools cover many common furniture assembly tasks.

7. Can the Xiaomi Mijia Tool Box drill holes?

No. The electric screwdriver is designed for installing and removing screws and does not replace a power drill.